This deburring tool repairs damaged bolts quickly!
The Heliburr Deburring External Chamfer Tool that quickly repairs damaged bolts to thread nuts in place once more, saving you time and money. The HELIBURR simplifies the repair process, potentially fractionalizing repair time, as well as bypassing the need to replace expensive or hard to find hardware while keeping safety at a previously unattainable level.
- Stainless Steel
- Hardened Steel
- Mild Steel
ATTENTION: Ineffective on Chrome-Moly (chromium and molybdenum). Some vehicle lug bolts are made with Chrome Moly, so please verify that the lug bolt is not Chrome Moly before using the Heliburr
This tool works by way of a shearing metal layer by layer. So there are some important things to know about using the HELIBURR. The most important thing to know is this: THE SLOWER THE BETTER. Using the lowest speed on your drill (50-400 RPMs), apply decent pressure and the tool will do the rest. Remember that we’re not making metal pencils; We’re removing damaged threads to allow an easy nut start. Remove only the amount of material from the workpiece that you need, and you will preserve the life of your HELIBURR.
Most repairs only require removing a single thread. The HELIBURR is a cutter, and just like a drill bit, it will reach the end of life depending on how you use the tool. Slow speed along with no unnecessary cutting and the use of cutting oil or another lubricant will bring your HELIBURR long life. Refrain from turning every workpiece into a pencil, and you’ll keep the HELIBURR cutting edge sharp for much longer.
- Tool Steel
- Effective up to Grade 8 SAE
- Fits size 8-32 bolts (.164) up to 3/4″-10 (.750) – (4mm -19mm)
- 100% Satisfaction Guaranteed